submerged arc furnace of ferroalloy

MODEL

Int.Vol(L)

Acceptable(kg)

Crucible Dim.(Øxh)(mm)

Power

(kW)

Weight

(kg)

Heating Speed

(mins)

JC-K-110-1 (110V 1Kw)

0.14

1-3KG

Ø38X115

1

4

25-30

JC-K-110-2 (110V 2Kw)

0.23

1-3KG

Ø44X140

2

4.3

15-20

JC-K-220-1 (220V 1Kw)

0.32

1-3KG

Ø50X150

1

4.8

25-30

JC-K-220-2 (220V 2Kw)

0.34

1-3KG

Ø60X121

2

5

15-20

1kg,2kg,3kg can all suitable for one unit

Only4kg capacity is available for one unit

Use

Removable crucible furnace for melting or maintaining melted state of non-ferrous metals.Handling the crucible with tongs.

Construction

Access to crucible from top,manual cover closing

Insulation

Multilayer insulation with double thickness of ceramic fiber

Electricity

Single-phase 220VAC,1000W,50Hz,220V standard plug

Heating

Silicon Carbide chamberwith no crack,no distortion,comparied with other traditional ceramic fiber chamber and quartz chamber

Working temp

2192F (1200C)Temperature controlled with an accurate digital thermostat

Melting Speed

(ModelJC-K-220-2)15-20mins heat up to 1200Degrees Celsius

25-30Mins(JC-K-220-1) heat up to 1200Degrees Celsius

Standard Delivered with

1x1kg crucible,1xcrucible tongs,1xinsluation glasses,1xgloves

Items

JC Electric Furnace

Other Similar Furnace

Furnace chamber

Adopts new advanced SIC material with no crack no distortion undernormal temp 1-1200Degrees Celsius,which prevents disadvantage of short work life with tranditional ceramic fiber, quartz chambers.

Traditional chamber material:ceramic fiber, quartz with easy crack and distort after use 2-3 times,which easily lead to short circuit and reduce work life.

Heating Coil

Material: Fe-Cr-Ni alloys Limited test temp up to 1600°C,make sure long continues continuous work time under normal 1200°C,which effectly extend furnace work life

Easy to crack after use 2-3times and lead to be out of work,it is very complicated process if replace coil singly,also many end users unable to replace it successfully by themselves.

Heating Speed

JC-K-220-1(220V1Kw)

25-30Mins

JC-K-220-1(220V 2Kw) 15-20Mins

25-45mins:

Reheat:15-30mins

Then need 10-15mins to complete finish the melting.

Working temp

1-1200Degrees Celsius

1-1150Degrees Celsius