LCD display Plastic Testing Equipment , Carbon Black Content Tester
Uses:
This machine is to determine the carbon black content of polyethylene, polypropylene, polybutylene
plastic. Sample is heated up under the nitrogen atmosphere,carbon black is obtained by pyrolysis.
Related standards: ISO 6964,GB/T2591.41, JTG E50 T1165,GB/T 13021, IEC 60811-4-1
Charactertisics:
1. Beautiful appearance,easy to operation;
2. The door of furnace is openable,convenient to place sample ,and make sure the best location of sample;
3. Fully automatic digital setting, man-machine conversation interface;
4. High-precision temperature control, large range of temperature, high uniformity of temperature of hearth;
5. Function with constant temperature, holding time can be set,and the accuracy of constant
temperature is high;
6. Parameters can be set separately in different phases,30 phases at most;
7. Parameter display comprehensive,include NO. of group, theoretical temperature,actual temperature,
heating time or holding time of constant temperature;
8. The setting parameters can be cheaked out while the machine is working.
Specifications:
|
Display
|
LCD display
|
|
Dimensions of furnace tude
|
25×450mm,50×450mm
|
|
Heating element
|
resistance wire
|
|
Length of heating zone
|
200mm
|
|
Length of area of constant temperature
|
100mm
|
|
Working temperature
|
≤1100°C
|
|
Highest temperature
|
1200°C
|
|
Temperature control
|
30 phases of programmable control
|
|
Accuracy of constant temperature
|
±1°C
|
|
Furnace construction
|
openable
|
|
Power
|
AC220V/50HZ/60HZ
|
|
Nominal power
|
1.2KW
|
|
Dimensions
|
340×300×390mm
|
|
Hearth dimensions
|
80×200mm
|
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews