|
Product Details:
Payment & Shipping Terms:
|
| High Light: | industrial powder coating ovens,gas powder coating oven |
||
|---|---|---|---|
Tunnel Type Powder Coating Oven Insulation With Electrical / Gas And Diesel Fired
Tunnel Type Electrical , Gas Powder Coating Oven With Welded Or Modular Construction
Quick Detail:
1. Welded or modular construction with high quality M.S Sheet
2. Hot air circulating blower for uniform heat
3. High quality insulation (Glass/mineral wool) to eliminate heat loss
4. Electrical,gas& diesel fired (heat exchanger)
5. Digital temperature controller with auto on/off or manual
below data just for certain project case
|
number |
item |
data |
|
1 |
External size: |
L25×W1.25×H4.92mm(the rail top elevation) |
|
2 |
Internal size: |
W1.15×H2.55m |
|
3 |
mode of drying tunnel: |
Full bridge mode |
|
4 |
Thickness of the insulated board: |
Side plate:120mm, roof/bottom plate:120mm |
|
5 |
Inner and outer plate of insulation layer |
Internal plate:δ1.omm galvanized board, outer plate:δ1.omm cold plate |
|
6 |
Wind tube |
δ 1.0mm galvanized board |
|
7 |
Natural exhaust device: |
1piece |
|
8 |
Effective drying length: |
About 40m(except the length of climbing section) |
|
9 |
Baking time: |
About 20 min |
|
10 |
Heating time (empty furnace) |
about45min |
|
11 |
Heating temperature: |
180～220℃ adjustable |
|
12 |
380000cal burner |
1piece FS38 |
|
13 |
380000cal heating box |
1set(outer plate:δ1.0mm cold plate, internal plate:δ1.0mm galvanized board) |
|
14 |
Heat induced draft fan |
4-72NO6A,1450r/min,4KW,2pieces |
|
15 |
380000cal heat exchanger |
High temperature resistant stainless steel, quantity:1set |
tunnel type powder coating curing oven system:
Whether electrical, gas or diesel fired. Whether batch type or conveyorized tunnel type. Designed and built
specially for Powder & Liquid curing purposes assuring you of low power consumption with uniform
temperature throughout the working space in the oven.
Melting & Curing constitutes a highly critical phase of the powder coating process. The curing schedules
recommended by the powder or liquid supplier must be strictly followed, if good adhesion & corrosion
resistance is to be achieved. While powder melts at approx.100°C, curing requires higher temperatures
usually between 180°C to 200°C.If the curing is inadequate, the quality will be brittle and flake-off easily.
If the powder coat is exposed to harsh heat its colour may change.
Construction:
Welded or modular construction with high quality M.S Sheet
Hot air circulating blower for uniform heat
High quality insulation (Glass/mineral wool) to eliminate heat loss
Electrical,gas& diesel fired (heat exchanger)
Digital temperature controller with auto on/off or manual
Asbestos gasketing, flap sliding doors
Perfect locking arrangement and heat resistant paint(in side)
Contact Person: Mr. Roni
Tel: 13825096163
Fax: 86-10-7777777
