Payment & Shipping Terms:
|Transmission Power:||5.5kw||Material:||304 Stainless Steel|
|Heating Power:||112.5kw||Voltage:||380v, Thrss Phase, 50hz|
|Type Heating:||Electric Heating||Remarks:||With Cooling System|
|Packaging Details:||Neutral Package,Wooden Package|
Peanut Processing Equipment,
Peanut Butter Processing Machine
5.5kw Peanut Processing Machine , Electric Heating Roasting Machine
Introduction of Peanut Roasting Machine :
Conveyor roasting equipment has the following characteristics:
1. Be roasted products inside and outside heat at the same time, the internal and external temperature
difference is small, not deformation, not change color;
2. Baking infinitely adjustable-speed control speed, high efficiency;Local heating, less energy waste,
3. Small volume, save space, save cost;
4. Can be used with production line of attachment, feed on the other side of the material.
The synchronous control and reduce the incidence of adverse;
5. The temperature can be set temperature control, high elasticity;
6. Forced circulation wind device;
7. Product in advance let stand shorter and less working hours;
8. Adopt stepless temperature control system, stable and reliable product quality,
and many other advantages.Widely used in food, electronics, chemical industry,
etc.Such as peanuts, cashews, walnuts, pistachio, almond, broad bean and other granular nuts, materials
1, check whether the transmission parts loose before operation, with or without abnormal noise ruled out
2 wear, connect the power cord to see if there is leakage phenomenon.
3, check after normal, start with idling, open the speed controller, twisting line speed switch to achieve
the required speed, the speed of can adjust at any time.
4, temperature setting reference manual of temperature controller, according to different materials
the discretion of the moisture content to set up different temperature in the furnace, a temperature control
table (natural light) after turning on the power supply.
Such as adjusting the temperature 90-100 degrees temperature control table with limit and lower limit set.
Two set with a fork, adjust the limit temperature when the fork to the limit position, twist the corresponding
knob, header indicates the temperature of 100 degrees, and then put the fork to the lower limit,
like limit to 80 degrees, the fork after adjusted the dial back to the middle position, is the 100-80 degrees.
5, primary drying, try the roast interval time, take out a small amount of material to see, in a timely manner
to master by temperature, the time required for drying material, wind to ensure quality.
6, blanched peanut baking temperature control to adjust the upper and lower temperature, 120 degrees
set temperature.Baking time 30-35 minutes, basic meet the requirements of white rice.Due to peanut/and
all kinds of nuts, materials including water level, different size, set temperature corresponding adjustments
according to the actual time.
7, reduction drive sprocket drive components, bearings, each bolt, electrical circuit check timely maintenance,
to ensure the normal use.
8, belong to wearing parts, electric heating tube with timely inspection or replacement after a period of time,
lest affect use.
We mainly deal with the manufactory, research and development of the food machinery.
Also to comply with the request of different clients' ,we could design and make the whole complete
processing line of different snacks food,just like core flakes processing line,bread making line,
small instant noodles processing line and so on.
We have a factory ourself which size is more than 10000 Square meters.There are more than 40 workers,including 11 high-skilled ones.
22 experienced engineers is working for us whose job is to research new machines,design for clients,commission equipments for clients.
There are more than 20 engineers and 15 after sales service personnels in our factory.Anything wrong when machines is operated will be dealt within 10 minutes.
3.Service & certification
a.) Consultation service before, during, and after sales;
b.) Project planning and design services;
c.) Debugging of equipment until everything is functional;
d.) Management of equipments' long distance shipping from seller's factory to named place by buyer;
e.) Training of equipment maintenance and operating personally;
f.New production techniques and formulas;
g) Provide 1 year complete warranty and life-time maintenance service;
By strong plywood box or according to customers' requirements
By sea from Qingdao, China
Welcome to visit our factory and hope we can reach a long-time cooperation
If you have any questions about our products, please feel free to contact us,
we will try our best to find suitable products for you!
We are committed to peanut processing machine industry